Reloading
Worn-out Brass
Post
May 20, 2012
Post
May 20, 2012
One pass, fourteen fail and 985 to go.
Cleaned for an extra hour to reach a semblance of shiney, this old brass sat in someone’s to-be-reloaded pile for years slowly growing cruft.
Stainless Steel Tumbler Media?
Post
April 6, 2012
Post
April 6, 2012
Any reloaders try these products yet? I’m interested in the stainless steel media.
OAL Adjustment Without Guessing
Post
March 20, 2012
Post
March 20, 2012
A little math can get you in the ballpark very quickly.
Tolerance in Brass
Post
March 6, 2012
Post
March 6, 2012
This is the last of a five part series on tolerances in reloading.
Tolerance in Bullet Weight
Post
March 5, 2012
Post
March 5, 2012
This is the fourth of a five part series on tolerances in ammunition reloading.
Tolerance in COL and Crimp
Post
March 4, 2012
Post
March 4, 2012
This is the third of a five part series.
In this part we look at Cartridge Overall Length (COL) and crimp to discover what tolerance is recommended and whether or not we can get accurate measurements with the available instruments.
Tolerance in Powder Throw
Post
March 3, 2012
Post
March 3, 2012
This is the second of a five part series on tolerance in reloading.
Tolerance in Reloading
Post
March 2, 2012
Post
March 2, 2012
Tolerance in Reloading (Introduction), Tolerance in Powder Throw, Tolerance in COL and Crimp, Tolerance in Bullet Weight, and Tolerance in Brass.